makeacut Editor

System editing: publish from your personal library, update system copies, and choose showcase and example designs.

Source

Design instructions

medium 3d-printing laser-cutting
units m
scale "n scale"

## modify me!
N_WIDE = 2

THICKNESS_0 = 1.5
THICKNESS_1 = 1.75
THICKNESS_2 = 2
THICKNESS_3 = 2.25

EDGE_PILLAR_WIDTH = 1.5
ARCH_BRICK_WIDTH = .8
MARGIN_GAP_WIDTH = 1
ARCH_GAP_WIDTH = 0.5

CORNICE_HEIGHT = 1
SEGMENT_HEIGHT = 11

DIAMETER = 8
RADIUS = DIAMETER / 2
HEIGHT_TUNNEL = 8.5

TOTAL_WIDTH = \
    N_WIDE * DIAMETER \
    + 2 * N_WIDE * ARCH_BRICK_WIDTH \
    + (N_WIDE - 1) * ARCH_GAP_WIDTH \
    + 2 * MARGIN_GAP_WIDTH \
    + 2 * EDGE_PILLAR_WIDTH

defaults:
    z-units mm
    thickness THICKNESS_0

defaults pattern:
    sides aligned
    groove-width 0.4 mm
    depth 0.3 mm

pattern bricks --name pillar_bricks:
    size 10 1.25

pattern bricks --name cornice_bricks:
    size 3 1

pattern bricks --name wall_bricks:
    size 1 .5

pattern bricks --name arch_bricks:
    size 0.32 ARCH_BRICK_WIDTH
    stagger 0.5

pattern bricks --name arch_bricks_bottom:
    size ARCH_BRICK_WIDTH 0.34
    stagger 0

defaults pattern:
    sides aligned
    color "#333333"
    line-width 0.15 mm
    groove-width 0.4 mm
    depth 0.3 mm

part pillar:
    group --pattern pillar_bricks:
        cut --thickness THICKNESS_1:
            rect EDGE_PILLAR_WIDTH SEGMENT_HEIGHT
        
part cornice:
    group --pattern cornice_bricks:
        cut --thickness THICKNESS_1:
            rect TOTAL_WIDTH CORNICE_HEIGHT
            
part margin_gap:
    space MARGIN_GAP_WIDTH 1

part arch_gap:
    space ARCH_GAP_WIDTH 1

part archway:
    # arch
    group --thickness THICKNESS_3:
        band --width ARCH_BRICK_WIDTH --align left --name inner_arch:
            line 0 ( HEIGHT_TUNNEL - RADIUS )
            arc RADIUS -180
            line 0 -( HEIGHT_TUNNEL - RADIUS )

    pattern --use arch_bricks:
        follow inner_arch

    hole:
        zero RADIUS ( HEIGHT_TUNNEL - RADIUS )
        circle RADIUS
            
        zero
        rect RADIUS * 2 ( HEIGHT_TUNNEL - RADIUS )

zero EDGE_PILLAR_WIDTH 0:
    group --pattern wall_bricks:
        rect ( TOTAL_WIDTH - 2 * EDGE_PILLAR_WIDTH) SEGMENT_HEIGHT        

zero: flow:
    place pillar
    place margin_gap
    repeat N_WIDE:
        place archway
        if not repeat.last:
            place arch_gap
    place margin_gap
    place pillar

zero 0 SEGMENT_HEIGHT:
    place cornice

Output

Fabrication preview

Loading…

makeacut

Design instructions

Fabrication preview

AI Help

Build something

Conversation

makeacut language guide

Open a design

Save design

Publish to system catalog

Previous versions

Select a revision

Plan print job

3D Printer